I believe dufuses or doofuses may be right. I couldn't find any DE so I gave up and changed the sand. The sand level was low and I removed all doubt about the sand being the problem. I don't think the sand was the problem but it didn't hurt. I will eventually find some DE and use it to remove the fine particles that I suspect is causing the cloudiness. I used the down time to glue suspected leaking joints. I also got the chance to spin the filter around so that I can access the drain without having to climb over the pumps. I got the new TF100 test kit and tested this morning. Between the heavy rains and inoperation, levels are a little out of whack. Pool is still cloudy but not foaming.
Levels are: FC=1 CC=1 PH=7.8 TA=110 CYA=40 TH=60 SALT=4000

At this point, my CC is a little high and my FC is low. I need to lower the CC and TA (which means lowering the PH). Can I do this all at once or do I just need to shock first? I plan to raise the CYA once I get TC right.