Went to pool place this morning to have them read a water sample:
TDS 1100 CYA 110 Tot Chlorine 0 Free Chlorine 0 PH 6.5 Total Alk 166 Tot Hardness 209
My readings were:
CYA 60 Total Chlorine .5 PH 6.5 Alk 210 Hardness 180
I added (2) of the Borax boxes and yes another 4 (1.42 gal) of the bleach 6%

Just checked after running pump for 4 hours
PH is above 6.8 but not a 7.2 as that is the range on my HTH kit.So 6.9-7.0 Gained but will need to add some in morning after another run to walmart
Total Chlorine at best 1.0--------------- Why am I not seeing the increase in Total Chlorine?
My kit only reads Total Chlorine-any advise?

Water could not be any clearer . So now what ?

Thanks