Results 1 to 6 of 6

Thread: HELP - High TA ph CH

Threaded View

  1. #1
    Join Date
    May 2010
    Posts
    11

    Question HELP - High TA ph CH

    Opened pool up major algae. 0 TC, pH - 7.8, TA - 170. CYA <10.

    So i looked here and did a super shock with about 8 gals of 6% bleach then ran filter for 18 hours, retested FC about 5 still green tinge so added 16oz calcium hypo - 73%. Ran filter 18 hours more.

    Algae hasd disappeared but now I am getting the following readings:
    TC < 1
    pH 7.9
    TA 220
    CH 360
    CYA < 5

    Additionally, the pol is cloudy and some sort of clearish scum floating on the top.

    Advise?

    Pool:

    20x40
    39,000 g
    Sand Filter
    Polaris 360
    Last edited by eddman; 05-13-2010 at 11:40 PM.

Similar Threads

  1. Advice Needed - High CYA, High Nitrates, and Lots of Algae
    By capshockeyfan in forum Pool Chemicals & Pool Water Problems
    Replies: 19
    Last Post: 07-03-2012, 04:47 PM
  2. High amounts of DPD Powder needed!! To high or no Clorine?
    By KaseyNewman in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 01-16-2012, 10:52 PM
  3. High Phosphates > 1,000 & High Nitrates 90ppm
    By applepar in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 21
    Last Post: 06-23-2011, 04:49 PM
  4. had algae, PH high, TA high, water now cloudy
    By Mom4fun in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 6
    Last Post: 06-12-2011, 12:09 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts