Closed Thread
Results 1 to 8 of 8

Thread: New pool, pump question

Hybrid View

  1. #1
    Join Date
    Dec 1969
    Location
    South Florida
    Posts
    39

    Default Re: New pool, pump question

    Hi,

    I was concerned with the size of the beach entry. Looks like it will be about 10' into the pool. About 3' of that area will be dry. That leaves 7'. With the slope of 1' in 7' it will drop 12" in depth over the remaining length. There will be a drop-off at the end of that on the right side and two additional steps on the left. While it may look nice, it's not a very functional area. Just my 2 cents....

    Pebble tec is the only way to go on a beach entry pool. You may even do that in a sandy beach color and the rest of the pool in blue or what ever color you have chosen.
    Zina
    Pool-Design . net

  2. #2
    GTakacs is offline Registered+ Thread Analyst GTakacs 0
    Join Date
    Apr 2006
    Posts
    51

    Default Re: New pool, pump question

    Quote Originally Posted by PoolDesignnet
    I was concerned with the size of the beach entry. Looks like it will be about 10' into the pool. About 3' of that area will be dry. That leaves 7'. With the slope of 1' in 7' it will drop 12" in depth over the remaining length. There will be a drop-off at the end of that on the right side and two additional steps on the left. While it may look nice, it's not a very functional area. Just my 2 cents....
    I am aware of the above issues, it is what the wife wants so this is what we're getting. We're paying a fortune for nothing essentially as far as swimming area goes. Your math is correct, we're doing a 1' in 7' drop down to 12" water level then two more steps at 10" each for a total depth of 42" at the shallow end (3.5 ft). I have an 18 month old son so I hope to get at least some use of the area for a little while.

    Pebble tec is the only way to go on a beach entry pool. You may even do that in a sandy beach color and the rest of the pool in blue or what ever color you have chosen.
    We'd love to get a separate color for the beach entry, unfortunately they're asking a $2000 surcharge for a second color, I think it's excessive. I will double check on these numbers, but for now I think we're going with a single color.

Closed Thread

Similar Threads

  1. Pool Pump and SWG Timer Question
    By Rugger in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 06-13-2013, 04:07 PM
  2. Pool Filter & Pump Sizing Question?
    By zooba72 in forum Pool Equipment & Operations
    Replies: 5
    Last Post: 06-17-2012, 10:02 PM
  3. Pool, pump and filter question
    By desertdog in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 06-19-2011, 04:10 PM
  4. Question about heat pump pool heater and fireman's switch on pump timer
    By HuntnHog in forum In-Ground Pool Construction and Repair
    Replies: 1
    Last Post: 04-20-2011, 07:37 PM
  5. wiring for a heat pump(new IG pool)question
    By freddyttt in forum Pool Equipment & Operations
    Replies: 5
    Last Post: 09-08-2006, 12:01 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts