Results 1 to 10 of 16

Thread: Aqua Rite = Amperage

Threaded View

  1. 05-10-2010 09:21 PM #5
    JasonLion
    JasonLion is offline --General User-- JasonLion 0
    Join Date
    May 2010
    Location
    12806 Gaffney Rd
    Posts
    5

    Default Re: Aqua Rite = Amperage

    Low amps could be caused by calcium scaling or by an aging cell that is almost worn out. Do a visual inspection of the cell plates. If there is any white chalky residue on the plates you have calcium scaling and need to clean the cell. If the plates look clean but the corners are worn away on some of the plates then the cell is aging and probably needs to be replaced.
    Last edited by JasonLion; 05-10-2010 at 09:23 PM.
    -- Trouble Free Pool website administrator --
    ------ note added by PoolForum staff -------
    Reply With Quote Reply With Quote
« Chlorine Free System | compu pool SWG »

Similar Threads

  1. aqua rite issue or no
    By MUTTS in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 6
    Last Post: 07-03-2012, 12:08 PM
  2. Aqua Rite cell is bad
    By moreyes in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 3
    Last Post: 07-15-2010, 05:30 PM
  3. Aqua RiteŽ Jr. ?
    By BND in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 4
    Last Post: 04-05-2007, 06:53 PM
  4. New Aqua Rite
    By Simmons99 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 10
    Last Post: 09-06-2006, 03:01 PM
  5. Aqua-rite Swg
    By DONNIE in forum Using Chlorine and Chlorinating Chemicals
    Replies: 2
    Last Post: 07-31-2006, 08:01 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules