Quote Originally Posted by polyvue View Post
I don't remember whether I got this from the Goldline manual or somewhere else:

Cell voltage 22-25 v when chlorinating else 30-35 v

Current 4.5 - 7.8 amps when chlorinating else 0 amps

The amperage of your SWG cell may be within normal operating limits if the water is cold. On my system 50° F. water and lower levels of salt (~2500 ppm) will cause the applied voltage to read 27.17 volts 3.30 amps.

It seems that both Goldline and Pentair manuals tend to be a bit skimpy on content... very frustrating when you're trying to diagnose a problem with an error code that isn't documented or just attempting to establish a baseline for future troubleshooting.
You have the right numbers according to their web page. However my water temp is 90 degrees and my salt level (according to the control box) is 3500 which is, if anything, a little high.