Bearing Replacement 1hp AO Smith Motor

[TRHOD12]

I'm in the same boat as you right now. I have the same motor on my Hayward superpump. I'd like to try replacing the bearing, but I can't seem to find what the bearing size/type that I need to replace.

I talked to a pool guy who has done some repairs for me, and he said he usually just replaces the motors on the pump when the bearing goes bad.

That seems like a waste to me, but I might have to do that unless I can find out what the bearing is that I need.

If I find anything out I will let you know.

[Spurgeon]

I bought a new motor, but kept my old one. I intend to repair the old one myself and keep it as a back up.

The bearings are very inexpensive, if you can find out the size. Most motor shops want 100.00 or more to install the new bearings. If you go this route, you are better off to go with a new motor. Mine was 184.00 with tax. Probably can find them cheaper on line but by the time you pay freight, they are about the same.