Once again, I screwed up

[CarlD]

Good luck! I had R-R in to snake my downspout drains. Did a good job but still cost a bit.

[rockg]

Well, an update since you guys tried to help me. I am getting a good bit of flow from the skimmer now and pressure is back up, so I think I'm going to be fine. I do know there's still some leaves, rollie pollies, etc in the skimmer line though. I have snaked it pretty much but really need to find a 3/8 snake 50 feet long... right now, I only have 25 feet so I have a feeling I'm not getting all the way through. I feel resistance about 16-20 feet. My plan is trying to find a 50 footer and use that. If all else fails, I can dig down to the line, cut it and then run a larger snake straight up the pipe. Right now, it's 3/8 inch snake that can get around the 90 degree bends. We'll see how it goes... but I'm feeling better about it.

Thanks guy for being there for me !!! I can't speak enough about how helpful you guys are !!!