A few years ago my Polaris booster pump would not run. I hit it with a 2x4 and it started. It ran good for the entire season. At the end of last season, the booster pump quit again. I hit it several times with a 2x4 and nothing happened. I closed my pool not wanting to deal with it. A week or two before my Polaris pump quit my filter pump would not run. There was an issue with the switch not making a connection when I flipped it on. I bent the metal throw switch a little bit and it made the connection and it worked.
I want to verify that my Polaris booster pump is getting electric. The pump spins freely by hand. It does not hum when the power switch is on.
All I need to do is turn on the booster pump and touch my multimeter to the two electric connections going into the pump Correct?
What setting should the multimeter be on?
Bookmarks