SWG and return jets.
I am adding a SWG to my 14k gallon AGP. It is a Aqua Trol unit from Goldline that hooks up to the return jet. I have 2 return jets and understand that I need to install the cell before these 2 jets and after the filter. Just want to get some advice on what I would be losing if I went from 2 jets to one.
Re: SWG and return jets.
Why would you need to go from 2 returns to one? Just nstall the SWG after the filter before the lines split. If you can't do that then just install the SWG on one of the two returns. You can still have two returns.
Last edited by mas985; 03-25-2010 at 11:22 AM.
Mark
Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater
Re: SWG and return jets.
Just wanted to know the advantages/disadvantages. that's all. That's exactly what I did, installed between the 2 jets.
Posting Permissions
Reply With Quote
Bookmarks