Results 1 to 3 of 3

Thread: Aqua Logic Controller not responding

Threaded View

  1. #1
    Join Date
    Jun 2006
    Location
    Southern California
    Posts
    5

    Default Aqua Logic Controller not responding

    I have a GoldLine (AQL-PS-8), that all of a sudden is not responding to any key press either on the inside the house wired controller or at the main controller. The keys beep when pressed, however nothing happens. I cut the power to force a reboot, however that did not fix the issue. I looked through the manuals and I didn't see any type of keyboard lock that may have gotten activated. We did have a little bit of rain today in (So Cal) but the controller was closed and dry. Any thoughts?

    Thank You
    Steve

    How I noticed the problem was the pool light was on, which was strange since nobody had turned it on that I was aware of. I went to turn it off and couldn't. After the reboot the light did go out.
    Last edited by desalvsj; 10-15-2009 at 02:14 PM.

Similar Threads

  1. Aqua logic false "low temperature"
    By desoto in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 0
    Last Post: 09-22-2011, 07:49 PM
  2. Which controller to get?
    By duksrule in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 0
    Last Post: 10-28-2009, 09:48 AM
  3. Aqua logic installation
    By RAP in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 05-12-2006, 09:30 PM
  4. Aqua Logic
    By HAYMAN in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 05-01-2006, 09:20 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts