Just bought a house in AZ. IG 10,000 gal concrete pool. SWG, hayward Cartridge filter, floor bubbler. Started everything up and initail readings, Salt - 810, pH 7.8, TA 100, CYA 0, calcium 250. Added 4 gallons of bleach and cleaned filters consistently for 24 hours. Brushed walls and kept cleaning skimmers and filter baskets and actual filter. Next morning added 4 gallons of bleach and brushed again and cleaned filters all day. CL-10, pH 7.8, TA 110, CAL 250. Little later added 5 lbs of CYA in a panty hose and another gallon of bleach, got in the nasty pool and brushed the floors and walls. It's slimy on the bottom and chunks keep floating to the top. It's kinda gritty but slimy. Foam on top of the water going into skimmer. CL-10+, pH 7.6, TA 120, CAL 250. Am I doing anything wrong? I am being patient and keep shocking and cleaning the filters. Will this ever clear? Any recommendations?