Results 1 to 4 of 4

Thread: Started the vinyl liner de-staining process... Some questions

Threaded View

  1. #1
    JWB is offline ** No working email address ** JWB 0
    Join Date
    Dec 2004
    Location
    Upland, CA.
    Posts
    35

    Default Started the vinyl liner de-staining process... Some questions

    Hi,

    I've begun to de-stain my 16'x32' 27,000 gallon pool. Unfortunately my CL level was very high so the 2 lbs of ascorbic acid I've used have worked, but mainly depleted my chlorine level. The results are very good but I'm still seeing a light brown stain in places. I've followed Marie's directions and am running the pump 24/7 now. Also, I added 12 capfuls of Metal Free.

    Since my CL is basically 0 and pH is holding at 6.8, would you recommend adding another pound of ascorbic acid to finish off the stains? I have some algaecide 60 if that's recommended at this point.

    Thanks,
    Jon
    Last edited by JWB; 06-25-2009 at 02:35 PM.

Similar Threads

  1. Questions about getting new vinyl liner..
    By heatherc in forum In-Ground Pool Construction and Repair
    Replies: 0
    Last Post: 02-21-2013, 08:47 PM
  2. Just started taking care of my own pool - Initial Questions
    By HofstraJet in forum Testing and Adjusting Pool Water Chemistry
    Replies: 9
    Last Post: 05-25-2011, 03:10 PM
  3. replacing vinyl liner / pool construction questions
    By MissAlabama in forum In-Ground Pool Construction and Repair
    Replies: 3
    Last Post: 05-31-2010, 10:51 PM
  4. Vinyl Chlorine pool - brownorange staining
    By drbob101 in forum Using Chlorine and Chlorinating Chemicals
    Replies: 3
    Last Post: 07-12-2009, 05:23 PM
  5. Sand floor questions and a replacement liner process
    By The Raddish in forum Above-Ground Pool Construction & Repair
    Replies: 1
    Last Post: 05-02-2006, 02:06 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts