From green to cloudy!

[MrApathetic]

Hi All. I just recently opened my pool (3 days ago), which when opened was fairly green, but only a little cloudy. I did the usual brushing the walls, etc etc, and then shocked, fairly hard, but not unusually. Yesterday, the pool was completely milky, and can't see the bottom even in the shallow end. I did a test and CL levels are right off the scale, which was to be expected. I hoped today would be better, giving time for eveything to settle that was going to settle, but it is still milky. I'm thinking about adding more shock, thinking maybe supersaturating the water will cause the fine particles to precipitate out.

Any ideas? This is a first for me in 6 yrs of pool ownership. I've seen cloudy after a hard shock, but nothing like this

[mbar]

What is your calcium level? Shock that is from calcium chloride will raise your calcium levels, which with high alkalinity and ph your will get cloudy water. If you can please post all of your numbers it will be much easier to help.

[Watermom]

In addition to what Marie said, also tell us what type of pool this is - vinyl, gunnite, fiberglass. Welcome to the forum.

Watermom

[mwsmith2]

Shock that is from calcium chloride will raise your calcium levels

Calcium Chloride is not shock. That's Ca+, Ca up, or whatever the flavor of the week is. I think you meant to say Calcium Hypochlorite.

Michael

[mbar]

Oops, Michael's right, I got it mixed up! sorry

[MrApathetic]

Hi again

I have an 18x36 vinyl pool. I'm using Sodium Hypochlorite (HTH) for shock. My PH is now very high( can't be a correct reading), which makes no sense as Sod Hypo usually lowers PH when you shock. I shocked with about 10 cups, which again is high, but I've done worse in the past. Usually a hard shock makes the water clarity better, but not in this case.

I'm off the scale with CL (the test is actually an orangy red!), so can't give you a number. PH is reading wrong as well as CL is so high.

I've shutdown my pump, and hoping things will settle out. The algae (and anything else for that matter, ha ha) is killed off, just have to deal with the cloudiness.

[Watermom]

We really need some numbers to be able to help. Can you get a drops-based kit and retest? (Preferably one that tests higher chorine than 5ppm.) You might also consider buying the kit that Ben sells at his www.poolsolutions.com website. It is the one that most of us use and is well worth the money. In the meantime however, try and pick up a different kit and repost with some numbers. Then somebody here will be glad to try and help you. Keep your pump running 24/7 for the time being while you are trying to clear the pool.

[waterbear]

Hi again

I have an 18x36 vinyl pool. I'm using Sodium Hypochlorite (HTH) for shock. My PH is now very high( can't be a correct reading), which makes no sense as Sod Hypo usually lowers PH when you shock. I shocked with about 10 cups, which again is high, but I've done worse in the past. Usually a hard shock makes the water clarity better, but not in this case.
Sodium Hypochlorite might raise pH slighlyly, not lower it but what is most likely happening is that the phenol red indicator has converted to chlorphenol red because of the high chlorine levels. Chlorphenol red goes through the same color changes as phenol red but at much lower pH. It will turn purple at a pH of 6.8 as compared to 8.2 with phenol red! The better quality test kits such as Taylor's and the one Ben sells on the sister website www.poolsolutions.com have a chlorine neutralizer added to help minimize this interference.
I'm off the scale with CL (the test is actually an orangy red!), so can't give you a number. PH is reading wrong as well as CL is so high.

I've shutdown my pump, and hoping things will settle out. The algae (and anything else for that matter, ha ha) is killed off, just have to deal with the cloudiness.

It is difficult to get an accurate pH reading when the Cl level is very high. Let your chlorine levels drop to a more normal range and then retest your pH before making any adjustments