Pump leak?

[Poconos]

They don't really wear out but sometimes a rib will lift out of the plastic channel and not seal right. They're easy to take apart and check. Put the handle in a mid position, that relieves pressure on the gasket, then take out the 6 bolts. or screws. The whole top assembly lifts out and you'll quickly see what the problem is. Nothing should fly apart. Do mark the top and bottom sections so you get it aligned right when reassembling. Let us know what you find and we'll work it from there. Whenever I switch mine now the pump is off and I press the handle slowly and let any water flow where it wants. Sometimes a rush of water even with the pump off may lift a rib if it isn't glued in solidly.
Al

[CarlD]

Shouldn't the lines be turned off or blocked off, first?

[Poconos]

If the filter is below water level as is usually the case in an above ground, yes, block the lines somehow. I assumed the filter was above water level.
Al