+ Reply to Thread
Results 1 to 9 of 9

Thread: air in return jets and my ordeal

Hybrid View

  1. 06-30-2013 10:26 AM #1
    wgregww
    wgregww is offline Registered+ wgregww 0
    Join Date
    Jun 2010
    Posts
    10

    Default

    I had air for a year and it ended up being a brass anchor from my winter cover lodged in the suction line where it made a 90 degree bend.

    By the way, I had to cut a 1ft square dig down to the elbow cut the line to remove it.
    Last edited by Watermom; 06-30-2013 at 02:03 PM. Reason: merge sequential posts
    Reply With Quote Reply With Quote
+ Reply to Thread
« Can I save grout damaged by low pH? | newbie used 2X4 method to start pump, need help on which contacts need cleaning. »

Similar Threads

  1. Air from return jets
    By cdsn99 in forum In-Ground Pool Construction and Repair
    Replies: 4
    Last Post: 04-25-2012, 05:33 PM
  2. Air bubbles in return jets
    By fog80 in forum Pool Equipment & Operations
    Replies: 5
    Last Post: 07-01-2010, 09:21 PM
  3. Spa return jets where to buy?
    By john509 in forum In-Ground Pool Construction and Repair
    Replies: 2
    Last Post: 06-05-2010, 11:04 AM
  4. SWG and return jets.
    By court475 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 2
    Last Post: 03-25-2010, 02:11 PM
  5. Air Bubbles in the Return Jets. My Fault?
    By ccostan in forum Pool Equipment & Operations
    Replies: 7
    Last Post: 05-26-2007, 04:39 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules