Results 1 to 6 of 6

Thread: Chlorine Not Showing Up...

Threaded View

  1. 03-26-2009 08:47 AM #1
    tommypenngotti
    tommypenngotti is offline Registered+ tommypenngotti 0
    Join Date
    Dec 1969
    Location
    .
    Posts
    9

    Default Chlorine Not Showing Up...

    18K IG
    ----------
    Ben's Kit :
    FC 0
    PH 7.4
    ALK 70
    CALC 180
    CYA 20

    just added 4llbs Stabalizer today , but I don't think that's the issue. I've just added 1 gallon 10% bleach (at night & I have a pool cover so sun is not the issue) & hour later got a 0 PPM CL reading?!? been adding bleach / 3 floating pucks & getting a very faint CL 0.5 . Pool looks somewhat clear , but I do believe there is an algae bloom of some kind going on. I tend to leave the pool alone in the winter w/ no bleach when it gets to 50 degrees.

    looking at posts from Ben - guess I need to dump in about 5 gallons of 10% Bleach!
    Last edited by tommypenngotti; 03-26-2009 at 09:12 AM.
    Reply With Quote Reply With Quote
« How many pucks to get to 30 to 50 ppm cya | 1st test results of spring - few questions... »

Similar Threads

  1. Pool pump showing a high psi
    By Wakkoguy in forum Pool Equipment & Operations
    Replies: 7
    Last Post: 07-17-2012, 11:54 PM
  2. No Chlorine showing up!!
    By Preston in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 4
    Last Post: 05-28-2012, 06:13 PM
  3. CYA not showing yet.
    By les_smith in forum Testing and Adjusting Pool Water Chemistry
    Replies: 16
    Last Post: 07-21-2006, 10:16 AM
  4. Still showing no cya
    By tjcat in forum DPD-FAS based testing
    Replies: 2
    Last Post: 07-02-2006, 04:41 PM
  5. Help! 911 - algae showing up
    By sw_stupid in forum Testing and Adjusting Pool Water Chemistry
    Replies: 9
    Last Post: 06-23-2006, 07:44 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules