+ Reply to Thread
Results 1 to 6 of 6

Thread: My nasty pool deck

Hybrid View

  1. #1
    Join Date
    May 2010
    Posts
    20

    Default Re: My nasty pool deck

    Have you considered removing it and replacing with a rubber type floor covering?

  2. #2
    Join Date
    May 2010
    Location
    Kilgore, Texas
    Posts
    5

    Default Re: My nasty pool deck

    Not sure about the rules on this on here, but I found a website that sells a roll-on bedliner coating, used it on the fence panels on my pontoon boat wich are aluminum. the stuff works great, easy to install and comes in a bunch of colors, the stuff was called Grizzy grip do a search and they should turn up.

  3. #3
    Join Date
    Dec 1969
    Location
    CT
    Posts
    34

    Default Re: My nasty pool deck

    No. I am not going to put any money into the decking material as the baking soda has done the trick. The pool is built like a tank but they went cheap on the decking material.

+ Reply to Thread

Similar Threads

  1. Brass deck jets versus Jandy deck jets
    By pumpkineater59 in forum Pool Equipment & Operations
    Replies: 0
    Last Post: 04-13-2012, 12:58 AM
  2. questions about cleaning nasty pool
    By Wheezer47 in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 1
    Last Post: 03-19-2012, 05:06 PM
  3. in deck or on deck slide and diving board
    By bszaronos in forum Pool Equipment & Operations
    Replies: 5
    Last Post: 03-16-2012, 12:52 AM
  4. moss on a carpet covered deck (factory pool deck)
    By JETTA in forum Above-Ground Pool Construction & Repair
    Replies: 3
    Last Post: 09-08-2006, 08:56 PM
  5. nasty stain on bottom at opening
    By docsobeck in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 3
    Last Post: 05-19-2006, 09:27 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts