Re: Salt Reading Error?
Me thinks you better have your installer check out the system. It's possible that if your cell is scaled up or some blockage on the cell, it will give you a false reading. The cell is attached with unions so you can remove it and visually inspect it. If you're able to see the blade (you may try a flash light on the opposite end, or if there there is some blockage on the plastic grid infront of the cell, these can also indicate no salt.
Or it may be something else worse.
First things first though and it's worth checking the easier stuff first.
Sean Assam
Commercial Product Sales Manager - AquaCal AutoPilot Inc. Mobile: 954-325-3859
e-mail: sean@teamhorner.com --- www.autopilot.com - www.aquacal.com
Bookmarks