Results 1 to 6 of 6

Thread: Help Deciding replace liner or whole pool?

Threaded View

  1. #2
    Join Date
    Dec 2004
    Location
    Indiana.
    Posts
    700

    Default Re: Help Deciding replace liner or whole pool?

    My thinking is you aren't going to get a pool that is near the quality of the Doughboy for $1300.

    Have you considered just using hard PVC underground to connect your existing skimmers and returns while moving the pump and filter away from the pool? As long as you don't change the elevation, there shouldn't be any problem, and often the skimmer location is chosen to perform best with the prevailing winds. The only downside to this is the trenching required and the slight extra effort of blowing the lines out to winterize. The trenching doesn't have to be very deep since the lines will be winterized. You could even leave them on the surface if the deck will cover them.
    Last edited by JohnT; 06-12-2008 at 03:11 PM.

Similar Threads

  1. Need Help Deciding: AO Smith Motor for Inground Pool, or Emerson US Motors?
    By hotajax in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 05-30-2013, 12:35 PM
  2. deciding about a used above ground pool.
    By firehawk in forum --cleanup--
    Replies: 2
    Last Post: 12-03-2012, 08:09 PM
  3. Any idea of cost to replace inground pool liner(southern ontario canada)
    By heatherc in forum In-Ground Pool Construction and Repair
    Replies: 1
    Last Post: 08-22-2011, 05:59 PM
  4. Looking for someone to replace pool liner
    By aylad in forum In-Ground Pool Construction and Repair
    Replies: 5
    Last Post: 03-18-2010, 05:39 PM
  5. Empty pool upon opening, time to replace the liner?
    By The Raddish in forum In-Ground Pool Construction and Repair
    Replies: 2
    Last Post: 06-09-2008, 10:53 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts