Need Help

[KPROMERO]

i have a aquarite, which is around 2 years old, and everything was running fine. My salt was at 3000 yesterday and when i got home today the pool has a light green tint to it and the aquarite is saying no flow. I took off the cell and looks clean and nothing was blocking it and even cleaned it while it was off. i put back on and same thing no flow light stays on. Please help......

[Poolsean]

Clean or backwash your filter.
Verify that the flow switch cord is properly plugged into the control unit.
Check all your valves and make sure they are not diverting flow away from the cell/flow switch.
Check that any valves after the cell are not closed off.

[KPROMERO]

Thanks but i just found out that flow switch is bad. Borrowed one from local pool place, but was told it is still under warranty.