I went to pool store and got different these results as the owner was on service call.
I vacced to waste and a lot green and junk came out. I then brushed the walls which I should have done first. My pole broke and I jumped in to get the middle. It looks like the bottom is cleaner but you still cannot see it as it is green and brown.
Pool place #'s are
FC .3
TC 1.1
CC .8
PH 7.9
hardness 60
Alkalinuty with stabilzer correction 50
Cyanuric Acid 35 (is this CA or CYA)
They did not run the Copper, iron and Total Dissolved Solids
She said the copper was broken and there was no sense to iron as Cholrine was present (??) or something I cannot remember.

The filter clogged in 2 hours . I am going to need to add water if I vac again.
I still think I need to vac again.
Any suggestions would be appreciated?

Daisy11, when do you add the metal out before you add well water? ! cycle, 1 hour, 5-12 hours, etc.