+ Reply to Thread
Results 1 to 8 of 8

Thread: Overwhelmed with pool chemistry

Hybrid View

  1. #1
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: Overwhelmed with pool chemistry

    Hi:
    First thing is get some good test numbers for us--you can take a water sample to a pool store and have them test it--don't buy anythng yet, just get the results.

    Here's what we need to see:

    FC (Free Chlorine--the good stuff)
    CC (Combined Chloramines--used up chlorine)
    pH
    TA (Total Alkalinity/Alkalinity or T/A)
    Ca (Calcium or Calcium Hardness)
    CYA (Cyanuric Acid/Stabilizer/Conditioner)

    Also, if they can test for metals then that's good too--Copper (Cu), Iron (Fe), Silver(forgot the symbol).

    Tests I couldn't care less about:
    Acid Demand
    Base Demand
    Total Dissolved Solids
    SI

    If it's not copper making your water green, it's algae. Once you know it's algae (Cu is VERY low) you can add 3 gallons of regular bleach (5.25%) or 10 quarts of Ultra Bleach (6%). I would just pour it in the skimmer with the filter running.

    But that's just a start--we'll need the other numbers.

    If the green is from copper, the bleach will be the wrong thing to do.

    If it is algae, do NOT add algaecides--bleach/liquid chlorine is the BEST algaecide.
    Carl

  2. #2
    Join Date
    Apr 2006
    Location
    South Carolina
    Posts
    9

    Default Re: Overwhelmed with pool chemistry

    Here are the results of the water test. Not good.

    FC - 0
    CC - 2.6
    PH - 7.4
    TA - 135
    Ca - 135
    CYA - 20
    Cu - 0
    Fe - 0

    They didn't test for silver, however manganese is a no.

    I appreciate your help with this.

    Valerie

  3. #3
    Join Date
    Dec 2004
    Location
    Indiana.
    Posts
    700

    Default Re: Overwhelmed with pool chemistry

    Get three gallons of bleach in there to get your chlorine up to 15, and keep it there. Check it several times a day, as algae will use it up. Add bleach as required. You can check with a standard kit by diluting the water sample with three parts distilled water and multiplying the result by four.

  4. #4
    mas985's Avatar
    mas985 is offline Lifetime Member Whizbang Spinner mas985 3 stars mas985 3 stars mas985 3 stars
    Join Date
    Dec 2004
    Location
    Pleasanton, CA
    Posts
    1,423

    Default Re: Overwhelmed with pool chemistry

    Looks like you have an algae problem. With a CYA of 20, you will need at least a FC of 12 ppm to kill the algae but better to start at 24 ppm since it will be used up fairly quickly killing algae and converting your high combined chlorine. For 12% chlorine, 24 ppm is 2 gallons of chlorine per 10000 gallons of pool water. For 6% you will need twice as much. Keep the CL level to at least 12 ppm until the algae is gone and the pool is clear. Once you kill the algae, the pool may turn cloudy. This is good. Keep a watch on the chlorine so it does not drop during this period. Also, keep the pump going 24/7 and vacuum the dead algae up when you see it on the bottom. Good luck.
    Mark
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

  5. #5
    Join Date
    Apr 2006
    Location
    South Carolina
    Posts
    9

    Default Re: Overwhelmed with pool chemistry

    Thank you for you help. Any idea where I can find the 12% chlorine?
    Valerie

  6. #6
    Join Date
    Dec 2004
    Location
    Indiana.
    Posts
    700

    Default Re: Overwhelmed with pool chemistry

    Quote Originally Posted by muundance
    Thank you for you help. Any idea where I can find the 12% chlorine?
    Poolstore.

+ Reply to Thread

Similar Threads

  1. Intex Owner 15' x 48" overwhelmed
    By ATC_NH in forum Pool Chemistry for Intex-type Pools
    Replies: 3
    Last Post: 07-13-2012, 04:49 PM
  2. Overwhelmed by all the pool chemistry
    By darylrue in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 4
    Last Post: 03-31-2012, 02:05 PM
  3. New here. A bit overwhelmed.
    By Mwil3 in forum Using Chlorine and Chlorinating Chemicals
    Replies: 20
    Last Post: 05-30-2010, 05:10 PM
  4. new to pool chemistry
    By mohawk in forum Testing and Adjusting Pool Water Chemistry
    Replies: 2
    Last Post: 07-22-2006, 10:26 AM
  5. Pool chemistry
    By jcarroca in forum Testing and Adjusting Pool Water Chemistry
    Replies: 19
    Last Post: 07-01-2006, 01:27 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts