Need MECHANICAL steps to open pool

[vanhout]

I usually put all the plugs back into the pump and filter, remove the plugs in the skimmers, and then remove the plugs at the return jets. Run the hose in the pump "catch pot" for a few minutes, then close it up and turn on the pump.

I'm not sure about the booster pump and line, I don't have one of those.

Good luck.

[MarkC]

The booster pump has a small plug in the bottom that needs to be reinserted as well.

[jenmenke]

oh oh. I didn't see that. And it's running right now! Would water be spewing out? I bet they didn't take that out... I'm going to check right now.