+ Reply to Thread
Results 1 to 10 of 18

Thread: Just need to make sure....

Hybrid View

  1. #1
    Join Date
    Dec 2004
    Location
    .
    Posts
    20

    Default Re: Just need to make sure....

    Thanks for the confidence. I guess my FC is not holding well because when I tested today (3pm) it was down to 7.5. I brought it back up and I plan to watch it close as I can.

    I have been reading on this site for some time now and I love it. It has never failed me. For some reason when I opened it this year it is the worst that my pool ever looked. (black lagoon) I still can not see the drain in the deep end yet I can see the bottom in the shallow end.

    My plan for now is to keep a close eye on FC (keep it above 12), pump running 24/7, vac to waste and not let the pressure get above 12. If it does I will clean the filter.

  2. #2
    Join Date
    Dec 2004
    Location
    Caledon, Ontario, Canada.
    Posts
    165

    Default Re: Just need to make sure....

    Is there any debris in the deep end, like a dead elephant, or maybe just a lot of leaves ??

    A lot of leaves that don't get scooped or vacuumed out will prolong this process because you will have to oxodize them all away with the chlorine.

+ Reply to Thread

Similar Threads

  1. would like to make you aware
    By ccheftaz in forum --cleanup--
    Replies: 1
    Last Post: 06-23-2013, 01:49 AM
  2. How big a mistake did I make?
    By jojasc in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 2
    Last Post: 11-05-2007, 10:05 AM
  3. Make sure I have this right - TA and CH
    By Trimom in forum Dealing with Alkalinity and Calcium
    Replies: 0
    Last Post: 06-19-2007, 03:37 PM
  4. Make sure I got this right...
    By steveinaz in forum Using Chlorine and Chlorinating Chemicals
    Replies: 6
    Last Post: 08-04-2006, 01:52 PM
  5. When to make Chlorine?
    By Karin in forum Using Chlorine and Chlorinating Chemicals
    Replies: 4
    Last Post: 06-28-2006, 02:19 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts