Hayward 244T Missing Multiport Label

[rob15]

My Sand filter (Hayward 244T) multiport label that shows all the positions for backwashing, etc is missing. I know 12:00 is the filter (Normal Position) but not sure of the others. Also, cannot seem to find someone who sells this as a part, unless you buy the whole multiport valve.

Would really appreciate if someone could tell me the positions or attach a .jpg of the top of the multiport.

Thanks to everyone for their assistance.

bob

[JohnT]

Are you pointing with the handle or the pointer? Hayward's standard layout (using the pointer on the opposite side from the handle) is Filter at 6, Waste at 8, Closed at 10, Backwash at 12, Recirculate at 2 and Rinse at 4.

[waste]

Good answer John - I just want to point out for anyone with a DE filter, the positions are 180 degrees opposite!