Ok guys, here is the complete info. I'm having a tough time with this because I proceeded to shock the pool to 20ppm last night and my FC this morning is back down to .2 with CC unchanged at about .6.
I've been on bleach since I opened 1 month ago.
I've tested ever other day and sometimes more.
I've never seen a FC number much over 1.0, as stated I was told by the taylor guy that I should shock and will end up with a good amount of FC in the pool. I've never once shocked and ended up with substantial FC.
CC started at 1.6 and has gone down to .6, but has not budged from .6 even though I've shocked 3 times.
PH has bounced between 7.2 and 7.5, and I'm adding borax every couple of days in attempts to bring it back up to 7.5 but it keeps going down.
TA was around 50 at open and about a week ago got to 100 via baking soda, today it read 130 - I'm not sure why it is going up on it's own.
CH - started at 130, tested today at 160
CYA - started at zero this year, added 6 pounds, then shocked twice with aqua chem granules from last year (which I assume have added more) I'm now at 80-100 CYA (I got 80, pool store got 100)
So, I'm left with not understanding much. I've read through the archives, and the taylor how to guide that came with the kit.
By the way. The water seems perfect. It just irritates me that the balance and cl levels are not as controllable as I imagined.
Bookmarks