Results 1 to 4 of 4

Thread: Need new pump motor, need help

Threaded View

  1. #4
    b2001 is offline Registered+ Thread Analyst b2001 0
    Join Date
    Dec 2004
    Location
    Dallas, Tx
    Posts
    94

    Default Re: Need new pump motor, need help

    I didn't end up getting the motor/pump that I said that I would in the post referenced above. I got a pentair dynamo 1hp 2 speed motor/pump - a little bit larger, but compensated by getting a 2 speed. I've been pleased with it so far.

    http://www.poolplaza.com/P-PAC-10-437-P.html

    I probably could have went with the 3/4 hp, but I split the difference between that and the 1 1/2 hp that I had. That referenced model does not have an electrical cord as many do not. I took the cord off of my old pump/motor and put it on the new one - five minute job.
    Last edited by b2001; 05-14-2008 at 08:49 PM.

Similar Threads

  1. Jauzzi pump : can't reconnect the motor to the pump, itis leaking badly.
    By andrec999 in forum Pool Equipment & Operations
    Replies: 5
    Last Post: 06-17-2013, 04:08 PM
  2. Recommendations For Replacement Pump Or Pump Motor (1.5" Piping, High Head)
    By ChuckDavis in forum Pool Equipment & Operations
    Replies: 9
    Last Post: 05-25-2013, 03:56 PM
  3. Replace motor or pump and motor?
    By myLABSpool in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 05-25-2013, 01:13 PM
  4. One motor primes pump another motor wont????
    By jmurch in forum --cleanup--
    Replies: 1
    Last Post: 12-17-2012, 10:47 AM
  5. Replace motor or motor& pump?
    By jtcaputo in forum Pool Equipment & Operations
    Replies: 6
    Last Post: 09-08-2012, 07:27 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts