+ Reply to Thread
Results 1 to 2 of 2

Thread: PoolPilot Install Questions SC-60

  1. #1
    Join Date
    Dec 2005
    Location
    Honolulu, Hawaii.
    Posts
    250

    Default PoolPilot Install Questions SC-60

    Sean,

    Three questions;

    The manual refers to using a 1/4" NPT drill bit and guide when installing the Stenner Tank 75005 and pump model number 45MP1, is this a narrow thread, or a wide thread? I bought both but would like to return one to Sears for credit.

    Can the Stenner pump be located below the manifold unit, pumping up to it? I presume it can but just wanted to make sure.

    Can the tank and pump be exposed to the elements. It would be semi-covered but is exposed to the sun and very infrequently it might get some rain if the winds blow from that direction.

    Aloha
    Last edited by smallpooldad; 04-28-2008 at 02:34 PM.

  2. #2
    Join Date
    Dec 1969
    Location
    Ft Lauderdale, Fl
    Age
    61
    Posts
    665

    Default Re: PoolPilot Install Questions SC-60

    The 1/4" npt holes are if you want to use the Stenner fittings that are included in the Stenner parts bag, or for threading into the Pump trap drain plug. Its the same thread as for the drain plug.

    However, you're better off using the injector fittings provided by AutoPilot for all holes drilled.
    It's a 3/8" drill bit needed for the injector fitting.

    The check valve for the acid line will prevent any back flow or pressurized water going back into the tank.

    It can be below water level and exposed to the environment.
    Sean Assam
    Commercial Product Sales Manager - AquaCal AutoPilot Inc. Mobile: 954-325-3859
    e-mail: sean@teamhorner.com --- www.autopilot.com - www.aquacal.com

+ Reply to Thread

Similar Threads

  1. Used Doughboy AG pool questions to help with install
    By rusty37 in forum Above-Ground Pool Construction & Repair
    Replies: 11
    Last Post: 06-11-2012, 05:05 PM
  2. A couple quick install questions
    By badutahboy in forum Above-Ground Pool Construction & Repair
    Replies: 0
    Last Post: 04-29-2008, 10:48 AM
  3. autopilot install questions
    By jmcst25 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 7
    Last Post: 06-09-2007, 10:33 AM
  4. PoolPilot vs AquaLogic
    By dc_soccerdude in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 6
    Last Post: 07-06-2006, 07:45 PM
  5. Should I get the Poolpilot with 60 cell?
    By kolwecoon in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 1
    Last Post: 06-02-2006, 06:06 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts