Results 1 to 10 of 19

Thread: Pool opening on the way!

Threaded View

  1. #2
    simsjim is offline Registered+ Thread Analyst simsjim 0
    Join Date
    Jul 2006
    Posts
    55

    Default Re: Pool opening on the way!

    Hi CarlD

    Sorry to hear about your back, hope you get well soon.

    Just curious, you mentioned no filling required. Do you lower the water in the winter below the skimmers? I always do that because the first year I was in this home (and the first time I owned an i/g pool) I hired a pool service company to close. (knowing I was going to watch very carefully and do it myself in subsequent years) Anyway, they explained that lowering the water and blowing the water out of the plumbing lines is recommended here in PA to avoid possible leaks from water expanding into ice and bursting joins and such in the plumbing.

    So, is that all just malarke? Do I not have to drain my pool to below the skimmers/preasure side outlets when I close? It seems a waste to just drain so much of that water that we spend a week superchorinationg and balancing to close.

    Curious to hear from you. You are someone whose posts I often read closely...

    Thanks,
    James
    Last edited by simsjim; 04-24-2008 at 02:52 PM.

Similar Threads

  1. opening our pool, could use some help
    By grayspinner in forum Dealing with Algae & Slime
    Replies: 8
    Last Post: 05-29-2011, 03:55 PM
  2. My pool opening?
    By KLHink in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 0
    Last Post: 04-06-2007, 04:27 PM
  3. Opening AG Pool
    By Ken S in forum Above-Ground Pool Construction & Repair
    Replies: 2
    Last Post: 01-30-2007, 09:35 PM
  4. Opening pool
    By brian87gt in forum Dealing with Algae & Slime
    Replies: 5
    Last Post: 05-28-2006, 01:28 AM
  5. Pool opening
    By GolfTop in forum Dealing with Algae & Slime
    Replies: 9
    Last Post: 04-01-2006, 09:33 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts