Pump-how long to run?

[mas985]

You must also add the vacuum head to get the total head. You can either measure it with a vacuum gauge or try to calculate it from pipe size and lengths. A guess is 14 feet of head for a total of close to 42ft of head. From the Northstar curve, which I also have, gives you about 112 GPM. Yes a good amount of flow.

Normally, the pipe size is larger for suction than return are you sure the suction is 2" and the return is 2.5"? Also, how long are the runs.

[gwrace1]

I live in South Texas and we swim year round. We use a two speed pump on low speed 12 hours per day. On low speed the 1.5HP pump only pulls 3.8 amps. We run pump at night with an SWG so maintenance is easy and water is crystal clear.

[albertgarrido]

You read my pipe size wrong.

Suctions are 2 inch....returns are 1 1/2 inch.....(I have two 1 1/2 inch returns with 2 jets on each of the two returns)


If I do have 112GPM...then heck...my filter may not be big enough....Hayward 4820...I think only rated for 95GPM ...gonna have to check this.