HELP with Jandy Aqualink RS 8

[captgene]

Waste

yes i did turn everything off and also disconected the battery too NOTHING

Reset on mother board NOTHING

NO Sparking or Zapping when I disconnected or connected the JVA

I have 2 JVA

Where is the BUS FUSE located ????? i am guessing on the Mother board I only see one small glass fuse

Does humming on transofrmer mean its working ??? However I have no reading on test meter when I test the 2 wires(Yellow)going to board along with green ground


GB

[captgene]

UPDATE
Well this morning I just replaced the transformer parts # 6612 my system is now working .I blow out the transformer when I forgot to shut off power to the system. $130.00 mistake. However MY JVA are still clinking . I iwll start another post for this problem.

Called Jandy they give me this guy ##Mark 707-539-3904 He is guy that make these PCB board. Jandy told me if it was the board he would fix it for $125.00 so call this guy before you replace the board.

[emcquaid]

Hello all.

I have arrived at the same diagnosis as my transformer hums, but tests 120 in and 0 out. I have purchased the transformer.

Besides turning power off at the breaker, is there anything else I need to be aware of to avoid damaging the new unit(and/or myself)?

Cheers,


Eric