"Check System, No Cell Power" Error - Aqualogic PS-8

[Geeper]

Finally got around to looking at the fuses and both look good. It's in winter mode right now (too cold for chlorine) so I'll have to wait until spring to see if reseating the fuses helped. If not, may need a new board.

Didn't take the time to check the xformer, but that could be the issue I guess.

Any other info is appreciated

[Geeper]

We're fully into spring mode now and no go on the fuse reset. Still getting error. Had the cell checked and it passed, so not sure what else could be the issue.

Anyone else seeing this at all and have a fix?

[stever13]

I have PS4 system and just stated having the same problem. Bad timing as temps are getting nice here in Phoenix and I have to go and buy some chlorine My system is about two years old. Any new ideaa/solutions?

[Geeper]

No joy. I called Goldline and they said it's probably the main board. I called both of their local repairs reps and one company charges a $105 fee just to come diagnose things. The other came out for free but told me to replace my salt cell, even after I told them I had had it tested and it passed, so confidence in them is low.

Problem I have with the diagnosis from Goldline of a failed board is that everything else works just fine except the salt cell, so I am leery to think it is the main board.

I am going to have my cell checked at another place to see if it passes there too. If so, I'll have confidence that it is not the cell and will have to have the expensive company come and check things out.

Same problem here with the temps. I'm putting 2 chlorine pucks in my skimmer every couple days and I want to get back to salt, so need to do something soon.

If you get someone to figure yours out, I'd appreciate the input