+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 18

Thread: Loop-Lock Repair

  1. #1
    Join Date
    Dec 1969
    Location
    Omaha
    Posts
    48

    Default Loop-Lock Repair

    I have a mesh (Loop-Lok sp??) pool cover for our IG pool, which we have used for several years now, and highly recommend...it has maintined its original shape and tensil strength well.


    However, this week when we were taking the cover off for the spring, we noticed a small hole in the mesh near one end. It was almost perfectly round, about the diameter of a cigarette, no frays, in fact my first suspicion was that it was a cigarette burn hole.

    I suspect that it may have been a burn hole from either an ember from the patio or house fireplace or from fireworks (New Years Eve).

    Anyway, does anyone know how to go about repairing a small hole like this? or is this something best left to the experts....

    Hal

  2. #2
    Join Date
    Dec 2004
    Location
    Indiana.
    Posts
    700

    Default Re: Loop-Lock Repair

    Quote Originally Posted by halds
    Anyway, does anyone know how to go about repairing a small hole like this? or is this something best left to the experts....

    Hal
    I'm not sure I'd worry about it. If it was burned, it sealed the edges of the hole when it happened. Unless it looks like it will tear, I'd be tempted to just ignore it.

  3. #3
    Join Date
    Dec 1969
    Location
    .
    Posts
    90

    Default Re: Loop-Lock Repair

    I had a mouse eat through my Loop Loc cover when it was stored for the summer in my shed. Loop loc sent me a repair kit. The kit is a peice of the cover material that is glued on both sides of the hole. Loop Loc sent the repair kit to me for free.

    Email them and get the repair kit.

    I would not let it go, I think the hole will get bigger and be too big to repair.

  4. #4
    Join Date
    Apr 2006
    Posts
    139

    Default Re: Loop-Lock Repair

    Some tent and awning companies will repair pool covers for you. Check them out in the yellow pages.

  5. #5
    Join Date
    Dec 1969
    Location
    Oklahoma
    Posts
    24

    Default Re: Loop-Lock Repair

    I've got a similar problem with my cover and sent an email to Loop-Lock a few days ago and this is their response:

    Thank you for your e-mail. We carry Patch Kits that are self adhesive patch size 4" x 8" and come 3 to a pack for holes 3” and smaller. Larger holes need to be sent in to be repaired. The patch kits cost for Ultra-Loc and Green Mesh covers are $18.75 plus shipping. Mesh Blue, Black, and Gray patch kits are $19.75 plus shipping; we accept Visa, MasterCard, Discover and American Express. Please send your address and phone number along with the type of cover you own and credit card information so that we can further assist you. If you have any further questions please call our Customer Service Dept. @1-800-562-5667.

    Thank you,
    Loop-Loc, Ltd.



    Hope that helps.


    50,000 gallon vinyl IG located in Oklahoma.

    - Korinian

  6. #6
    mbar's Avatar
    mbar is offline Lifetime Member Whizbang Spinner mbar 3 stars mbar 3 stars mbar 3 stars mbar 3 stars
    Join Date
    Dec 1969
    Location
    Ashland, PA
    Posts
    1,009

    Default Re: Loop-Lock Repair

    I repaired my mesh cover with one of these patches 3 years ago and it is still holding - it was very simple too!.
    Northeast PA
    16'x32' kidney 16K gal IG fiberglass pool; Bleach; Hayward 200lb sand filter; Hayward pump; 24hrs; Pf200; well; summer: none; winter: mesh; ; PF:7.5

  7. #7
    Join Date
    Dec 1969
    Location
    Omaha
    Posts
    48

    Default Re: Loop-Loc Repair

    Thanks for the responses!


    Korinian and mbar, it sounds as if the company has changed policy and now charges for the patch? Is the patch similar to the type used for repairing tarps if so, wondering if you could save some bucks just using a tarp repair kit?

    Was there anything special about the repair kit that would justify the higher price for the kit?
    Hal

  8. #8
    mbar's Avatar
    mbar is offline Lifetime Member Whizbang Spinner mbar 3 stars mbar 3 stars mbar 3 stars mbar 3 stars
    Join Date
    Dec 1969
    Location
    Ashland, PA
    Posts
    1,009

    Default Re: Loop-Lock Repair

    To tell the truth, I don't remember if I had to pay for it. The reason it is good to get it from them is that it is made from the same material and color as the mesh cover.
    Northeast PA
    16'x32' kidney 16K gal IG fiberglass pool; Bleach; Hayward 200lb sand filter; Hayward pump; 24hrs; Pf200; well; summer: none; winter: mesh; ; PF:7.5

  9. #9
    Join Date
    Dec 1969
    Location
    Oklahoma
    Posts
    24

    Default Re: Loop-Lock Repair

    I don't know if I'd trust the tarp repair kit's adhesive to be the same. I think you'd expect the one from Loop-Lock to be able to handle water and pool chemicals to a certain degree. It could, very well, be the exact same kit, but I'll probably go with the one from Loop-Lock just to cover my bases.
    50,000 gallon vinyl IG located in Oklahoma.

    - Korinian

  10. #10
    mbar's Avatar
    mbar is offline Lifetime Member Whizbang Spinner mbar 3 stars mbar 3 stars mbar 3 stars mbar 3 stars
    Join Date
    Dec 1969
    Location
    Ashland, PA
    Posts
    1,009

    Default Re: Loop-Lock Repair

    When I got the kit, it didn't come with adhesive - they said to use the adhesive "household goop" which I got at lowes.
    Northeast PA
    16'x32' kidney 16K gal IG fiberglass pool; Bleach; Hayward 200lb sand filter; Hayward pump; 24hrs; Pf200; well; summer: none; winter: mesh; ; PF:7.5

+ Reply to Thread

Similar Threads

  1. Please help with choosing Loop Loc cover
    By TomC in forum Pool Equipment & Operations
    Replies: 6
    Last Post: 08-10-2011, 08:30 AM
  2. Loop Lock Cover Cost
    By CJDahl in forum Pool Equipment & Operations
    Replies: 4
    Last Post: 09-20-2006, 11:43 PM
  3. loop loc prices
    By csamra in forum Pool Equipment & Operations
    Replies: 9
    Last Post: 07-20-2006, 08:01 AM
  4. How to store mesh loop-loc cover?
    By MykeSS in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 05-10-2006, 08:02 AM
  5. Loop Lock Cover
    By donfranko in forum Pool Equipment & Operations
    Replies: 4
    Last Post: 04-03-2006, 02:26 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts