Results 1 to 10 of 12

Thread: borax in the pool

Threaded View

  1. #6
    chem geek is offline PF Supporter Whibble Konker chem geek 4 stars chem geek 4 stars chem geek 4 stars chem geek 4 stars
    Join Date
    Nov 2004
    Location
    California
    Age
    66
    Posts
    2,226

    Default Re: borax in the pool

    Sean,

    1 box of 20 Mule Team Borax is 76 ounces weight and increases Borates by about 6.5 ppm in 10,000 gallons. So it takes 7-3/4 boxes to raise the Borates by 50 ppm in 10,000 gallons.

    The rate of 1 box per 1,000 gallons would yield 65 ppm which would overshoot your 50 ppm target. Adding 4 boxes to 19,000 gallons would raise the Borates by 13.6 ppm.

    Also, one box of 20 Mule Team Borax requires 36.3 fluid ounces of Muriatic Acid (31.45% Hydrochloric Acid) to keep the pH the same.

    Richard
    Last edited by chem geek; 11-01-2007 at 03:38 PM. Reason: changed "ounces" to "ounces weight" for clarity

Similar Threads

  1. Adding Borax to Make your Pool Resistant to Algae
    By PoolDoc in forum Dealing with Algae & Slime
    Replies: 2
    Last Post: 06-17-2015, 12:37 AM
  2. Calculating dosage for borax and dichlor powder for Intex easy set pool
    By swimg in forum Pool Chemistry for Intex-type Pools
    Replies: 5
    Last Post: 08-11-2012, 10:53 PM
  3. 50 ppm Borax
    By Henry3 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 14
    Last Post: 07-15-2006, 07:53 PM
  4. How much Borax should I add
    By adl6009 in forum Using Chlorine and Chlorinating Chemicals
    Replies: 4
    Last Post: 06-28-2006, 03:07 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts