Thanks...you may be on to something. I tried again today and the same thing happened. I didn't have a 2x4 but my boot worked. I gave it a decent boot and it started up. Will have to clean the contacts when the weather clears. Thanks much for the post.

Quote Originally Posted by brittmer View Post
I have a one-speed pump that when the pump was cold and I started it up, it would struggle to get going. Once it was running it kind of surged all of the time instead of running smooth. If I shut it off and then right back on it worked fine.
Mine ended up being a bad startup capacitor on the motor. Maybe the capacitor is bad allowing enough juice to start in low speed but not enough for high speed.
Check this post and it will tell you how to check the capacitor. http://www.poolforum.com/pf2/showthr...t=hayward+pump