+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 17 of 17

Thread: What do you wish you would have done?

  1. #11
    Join Date
    Mar 2006
    Location
    Downingtown, PA
    Posts
    27

    Default Re: What do you wish you would have done?

    1-I got white plaster-should have gotten a shade of blue plaster-(better looking with water and also hides the dirt/stains
    2-install a SWG as part of construction-took me 2 years to finally install one myself-wonder how I managed the old way
    3-I have a free form (kidney) shaped pool with one light at deep end-should have gotten a light in the shallow end also
    4-normal pool discharges are in the shallow end and point horizontal approx 1 ft below water surface. That direction relative to the surface is enough to cause turbulence on the water surface with resultant pH rise over time due to aeration. Should have been pointing down or better yet have jets that I can position as needed.
    Don
    30,000 gal concrete pool -- Autopilot SWG
    Using BBB for chemistry -- Using LaMotte ColorQ for testing

  2. #12
    Join Date
    Nov 2004
    Location
    Palm Springs, California, USA.
    Posts
    21

    Default Re: What do you wish you would have done?

    1. Placed the second bottom drain in the shallow end.
    2. Placed the tpr's in more effective locations to help with currents around both bottom drains.
    3. Placed 2 more tpr's around the tanning shelf to help blow off the debris.
    2. Went with Pentair equipment instead of Jandy.
    3. Installed the laminar deck jets instead of the non lighted deck jets.
    4. Installed a DE filter from the get-go, instead of the cartridge filter. (fixed this problem already)

  3. #13
    simsjim is offline Registered+ Thread Analyst simsjim 0
    Join Date
    Jul 2006
    Posts
    55

    Default Re: What do you wish you would have done?

    I wish I would have done more research on contractors before I chose one to do my pool reno job. I had many, many difficult challenges with the contractor I chose. Most astounding was the inferior quality of his work and the duration of the entire renovation.

    mechanically speaking:
    I would have insisted on 2" pvc
    more control valves on suction side
    Installed heat pump
    Electrical outlet on the edge of the concrete deck area

    For those that want to know, if you are in the PA area, and hear the name Forchetti and Pools in the same sentence, run away. Avoid this company at all costs. Friendly guy, poor worker.
    Last edited by simsjim; 05-01-2008 at 08:27 AM.

  4. #14
    Join Date
    Apr 2006
    Location
    Scottsdale, Arizona
    Posts
    526

    Default Re: What do you wish you would have done?

    I'd probably not have asked that Cop to hold my beer while I got my wallet out....
    14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7

  5. #15
    waterbear's Avatar
    waterbear is offline Lifetime Member Sniggle Mechanic waterbear 4 stars waterbear 4 stars waterbear 4 stars waterbear 4 stars
    Join Date
    Nov 2004
    Location
    St. Augustine, Fl
    Age
    71
    Posts
    3,743

    Default Re: What do you wish you would have done?

    Used a different pool builder instead of the out of business, drug addict crook that left me with a pool I had to finish myself.
    Retired pool store and commercial pool maintenance guy.

  6. #16
    Join Date
    Dec 1969
    Location
    .
    Posts
    9

    Default Re: What do you wish you would have done?

    Used a flagstone coping (native to my area) instead of a tumbled stone.

    Used a colored plaster instead of brite white to help hide stains.

    Made my entry (step) area larger.

  7. #17
    Join Date
    Dec 2004
    Location
    Valley Forge, PA, USA.
    Posts
    11

    Default Re: What do you wish you would have done?

    Built in a sun shelf.
    29K gallon IG Shotcrete Plaster Pool
    Spa with spillway
    DE filter
    Raypak 400K btu heater

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts