I covered my in ground last weekend since we were projected to have one cloudy day after another and along with shortening days and the lowering sun getting lost behind tall trees, I knew that come this weekend the temperature would've dropped from 84 to the high 70's, and that's too cold for me. Also, we've been in a prolonged drought (which has finally broken) and we're having a premature fall and lots of leaves are falling. Once I can't do laps anymore, I find it's best to cover the pool so I don't have to tend to it after 4 months of doing all the work myself. The irony is that here in Alabama September is still very humid and hot.
However, I just hatched an idea. Another irony is that the winter cover acts as a solar cover, preventing heat loss at night and accelerating solar power during the day. With the cover on, that water will be swimmable for at least another month. But alas, it's covered. Or is it?
Why couldn't I rig something up whereby, after rolling one side of water bags off, I alone could pull the cover back, one end at a time, to expose about a five-foot width of water? Like tie a rope to each end where a loop is, then one end at a time, gently pull it up and back and then tie that rope to something that's elevated from the ground (deck railing, tree, etc.). That way that edge of the cover wouldn't get pulled under by any pool water. Then when I'm done with my laps, I would just take the rope at either end and pull the cover back and roll a couple of water bags back on it to secure it. I think this is possible! I'm going to try it tomorrow…
Bookmarks