+ Reply to Thread
Results 1 to 10 of 14

Thread: new pool owner trying to balance swg pool

Hybrid View

  1. #1
    cathy404 is offline ** No working email address ** cathy404 0
    Join Date
    Apr 2006
    Location
    atlanta
    Posts
    4

    Default Re: new pool owner trying to balance swg pool

    My salt meter reads 4000. I thought I'd just leave it and not bother trying to change it. Is there any reason it matters much that it's a little high?

  2. #2
    Join Date
    Dec 2004
    Location
    VA, USA.
    Posts
    28

    Default Re: new pool owner trying to balance swg pool

    Hi Cathy,

    I have the mineral springs system which came with the new pool. 22 000 IG . The builder left me with 600 pounds Beginners. I balanced the pool and added 300 pounds and my display went straight to 4000 which should be fare to much and the unit should not produce sanitizer. I had my mineral level checked and it was around 1600 so I added all minerals in with brought me up to 3200 according to the test. I called biogard and they stepped me trough a test program with the result that everything is looking good. The service tech told me that a new unit could show for the first weeks some unrealistic #’s and it should be OK in 1 or 2 weeks. We will se so fare no change. I don’t trust the display anyway but with a new unit I should come at least close and specially as the manual says if the minerals go over 3800 the unit will shut down. So I ask myself is the unit operational at all. I tested my Chlorine and from the figures it looks like the unit works but it just don’t feel right. I know that I will not spend next year 30 $ a bag for the Beginnings and the Renewal also look like a balancing pack nothing else. I started my research on what is really in this stuff so I’m sure with this forums help I will soon know what I need to get and that for the 3rd of the price Biogard ask for the same things.

    Guido
    Last edited by Guido; 04-27-2006 at 08:28 AM.

  3. #3
    mas985's Avatar
    mas985 is offline Lifetime Member Whizbang Spinner mas985 3 stars mas985 3 stars mas985 3 stars
    Join Date
    Dec 2004
    Location
    Pleasanton, CA
    Posts
    1,423

    Default Re: new pool owner trying to balance swg pool

    Cathy,

    The unit will shut down if the salt level is too high so if the diagnostic menu shows it generating chlorine when you first turn the pump on, then I would say it is ok. If the display shows a high salt warning, then the unit has shut itself down and you will have to replace some of the water to get the salt level down. Also, higher salt levels will generate more chlorine.
    Mark
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

+ Reply to Thread

Similar Threads

  1. Old pool...New owner...Stat heavy...looking for balance advice
    By sox6035 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 6
    Last Post: 06-15-2013, 12:21 PM
  2. New pool and trying to balance the water.
    By mrup1012 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 7
    Last Post: 05-13-2012, 11:37 AM
  3. New Pool Owner Can't Get a Hold of Water Balance! Please help!
    By bigdogfirefighter2003 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 06-26-2011, 08:15 PM
  4. Alkalinity/ Pool Water Balance
    By crazyone2826 in forum Dealing with Alkalinity and Calcium
    Replies: 1
    Last Post: 07-05-2006, 12:24 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts