+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 14 of 14

Thread: Not wearing panty hose

  1. #11
    Join Date
    Apr 2006
    Location
    Scottsdale, Arizona
    Posts
    526

    Default Re: Not wearing panty hose

    Quote Originally Posted by chuck9997 View Post
    Not sure about my filter.. that's why I want to put the hose on the return.. to see if I get anything.

    Geeze.. it takes so many posts.. to get one answer.

    A little kindness when clarifying someones mistake may help you to get the help you are requesting.
    14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7

  2. #12
    Join Date
    Dec 1969
    Location
    Tennessee.
    Posts
    88

    Default Re: Not wearing panty hose

    thanks everyone for your replies.. didn't mean to snap at anyone.. I am just so frustrated with the pool this year.. It has been a breeze for the last 4.. but I am seriously considering going back to mowing that part of my yard.. might be easier than figuring out this problem.

    From researching here.. I probably have a problem in the filter.. that's causing the sand to blow out into the pool. But.. I really don't look forward to opening up the filter and investigating.. I am not very mechanical.. Is there a step by step guide to filter maintenance anywhere?
    Swimming pool.. or camper? Swimming pool.. or camper? ...what the heck.. buy both.

  3. #13
    NWMNMom is offline Registered+ Widget Weaver NWMNMom 0
    Join Date
    Nov 2004
    Location
    WAAAY NW Minnesota
    Posts
    461

    Default Re: Not wearing panty hose

    A guess but thinking its your laterals?.....Is it blowing air bubbles back in or anything else? When you backwash do you run a rinse cycle for very long before turning the multiport back to filter? I did in fact see a post or two here from one of the guys Al or Dave maybe? that went into a pretty good detail on how to check....Maybe use the search and check "laterals"
    Beats driving to the lake!
    18'x33'x52" AG oval, hard plumbed system, 22" Pentair Meteor Filter 1.5hp pump, Goldline SWCG System, 2/4x20 SolarBear Panels, Biltmore Steps - 16x14' composite deck, Pool Rover Jr

  4. #14
    joliecharlie is offline ** No working email address ** Thread Analyst joliecharlie 0
    Join Date
    May 2006
    Location
    Pinehurst, North Carolina
    Posts
    75

    Default Re: Not wearing panty hose

    Janet's post in another thread details how to service the filter.
    It is titled... for those with sand blowing back..... you may have already found it.
    We had problems with sand flowing in pool this year too. We replaced the multiport valve, gasket and checked the laterals after emptying sand using wet dry vac and replaced sand. (We decided to replace valve because it was cracking from exposure to elements)
    It wasn't too big of a job, but then again, I was just the gopher

+ Reply to Thread

Similar Threads

  1. popped backwash hose near end of hose
    By Gretzky99 in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 05-22-2013, 09:30 PM
  2. Skimmer Sock or Panty Hose in Pump Basket?
    By Shifty in forum Pool Cleaning: Manual or Automatic
    Replies: 10
    Last Post: 08-02-2012, 11:12 AM
  3. Having trouble with the plastic drive gear on Baracuda MX8 wearing out
    By POOLLEDS in forum Pool Cleaning: Manual or Automatic
    Replies: 1
    Last Post: 07-13-2012, 07:48 PM
  4. Wearing of Impeller and Diffuer on Northstar Pump
    By abrenner in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 04-14-2012, 05:21 PM
  5. Panty Hose on Skimmer?
    By nanniesrock in forum Using Chlorine and Chlorinating Chemicals
    Replies: 10
    Last Post: 08-14-2006, 11:15 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts