I suppose this could have happened before I was putting the laterals in, but I think I overtightened the laterals, and... CRACK! There goes the hub...
IMG_1432.jpg
Re: For those of you with sand blowing back into the pool....
I suppose this could have happened before I was putting the laterals in, but I think I overtightened the laterals, and... CRACK! There goes the hub...
IMG_1432.jpg
26,000 gal IG vinyl liner pool (20'x40'), Waterway SMF-110 wet end w/ Century SQS-1072R motor, Pac-Fab Triton TR60 sand filter, K-2006A. Manually added chems: 12.5% NaClO liquid, granular CYA, baking soda, 31% muriatic acid.
Re: For those of you with sand blowing back into the pool....
New hub and old hub. Too bad they don't attach the same, but the parts are damn similar for a Pac-Fab Triton from the 80's, versus a current Pentair Triton II.
IMG_1435.jpg
Here's what a groove created by sand looks like. This must be the culprit to where sand was blowing back in, though the entire web of lateral spokes were cracked long before I got into the filter yesterday. The spots where it cracked show some aging and wear, as if they'd been there for a while.
IMG_1436.jpg
26,000 gal IG vinyl liner pool (20'x40'), Waterway SMF-110 wet end w/ Century SQS-1072R motor, Pac-Fab Triton TR60 sand filter, K-2006A. Manually added chems: 12.5% NaClO liquid, granular CYA, baking soda, 31% muriatic acid.
Posting Permissions
Reply With Quote
Bookmarks