Hey folks,

I'm about to help a friend install a Hayward Pro Series sand filter in his above ground pool. I have never done this before or even worked with a sand filter before, however I've installed my DE Filter many times for my in-ground pool many times.

What are some of the differences I should be aware of (other than don't put in DE of course)? Like, obviously I make the connection to the pump and the return to the pool. After that, I imagine I should add sand. Anything I should be aware of in this part? Like, add slowly, or mix with water, or monitor pressure...?

Is there anything else that needs to be done or any other differences? Does a backwash need to be performed at some point?

Thanks for the help!