I'm not sure about the threat to your liner. I would vacuum them up but not to waist. Get them in your filter to dissolve there.
Hello all,
I've been searching, but can't find the answer....
I dissolved CYA in a bucket of warm water 2 pounds at a time using a drill and a paint mixer to pour into the pool. Despite my best efforts, there's about a pound of undissolved CYA granules running around the bottom of my pool. Is that a problem for the liner? Should I vacuum them up and backwash to waste?
Many Thanks,
Frank
I'm not sure about the threat to your liner. I would vacuum them up but not to waist. Get them in your filter to dissolve there.
14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7
Thanks Phillbo,
I went out this morning and they were dissolved except for just a handful in a small divet in the bottom. That's about 18 hours with the pump on low. Didn't hurt the liner after all.
Thanks for the reply!
Frank
Bookmarks