+ Reply to Thread
Results 1 to 6 of 6

Thread: Using 12.5% chlorine

Hybrid View

  1. #1
    Join Date
    Jun 2006
    Location
    NW Oregon
    Posts
    82

    Default Re: Using 12.5% chlorine

    Thanks for the caution! My feeder is empty and turned to 0 so it shouldn't be a problem (I hope).
    34 X 22/15 inground vinyl w/ Hayward equipment

  2. #2
    KurtV is offline Registered+ Widget Weaver KurtV 0
    Join Date
    Dec 2004
    Location
    Mandeville, LA, USA.
    Posts
    418

    Default Re: Using 12.5% chlorine

    I'd run the chlorinator wide open for a day or two, just to make sure all the tri-chlor is flushed out, and then close it (turn to zero) before adding bleach through the skimmer.

+ Reply to Thread

Similar Threads

  1. Chlorine tabs vs chlorine bleach generic
    By Cahoonh in forum Using Chlorine and Chlorinating Chemicals
    Replies: 6
    Last Post: 06-13-2013, 09:28 AM
  2. High Chlorine Level with no Chlorine Added in 6 weeks
    By morechoff in forum Pool Chemicals & Pool Water Problems
    Replies: 3
    Last Post: 06-27-2006, 07:52 AM
  3. Free Chlorine vs. Total Chlorine adjusting
    By Truckman in forum Testing and Adjusting Pool Water Chemistry
    Replies: 16
    Last Post: 06-08-2006, 05:00 PM
  4. alternatives to chlorine/non-chlorine pool maint
    By leewest in forum Dealing with Stains & Metals, . . . and 'Minerals' & 'Ions',
    Replies: 3
    Last Post: 04-04-2006, 10:53 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts