Thanks
I will post the CH levels tonight, I am using the drop based kit that I bought here last year. I brought the pool up over 15ppm cl it cleared some but not clear like it was. Ill post results tonight when I get home
Thanks
Kevin
Thanks
I will post the CH levels tonight, I am using the drop based kit that I bought here last year. I brought the pool up over 15ppm cl it cleared some but not clear like it was. Ill post results tonight when I get home
Thanks
Kevin
Do you have a drain at the bottom of your pool? If your "ig vinyl liner" is like mine you don't. So all your water gets pulled from the top and the "heavier, cloudy" water is below the skimmer. Take a vacuum head, connect it to the cleaner or skimmer ports and toss the head in the deep end to pull from the bottom. If you have a sand filter add a cup of DE through the skimmer first.
My pool was slightly green & cloudy on Saturday morning because I let it go for a couple days. Did the above (along with 2 gals of bleach) and I was crystal clear the next morning,.
Ken J
Glenside, PA
16x32 Inground, 20,000 Gals, Pentair WhisperFlo Pump WFDS-24, Hayward Sand FilterS310T2 (with occasional DE added)
Thank You
I added another box of Borax about 2-1/2 hrs ago and brought the water back up to shock level a couple of minutes ago.
The pool is a lot better ,almost crystal clear, I turned the auto chlorinator back on yesterday (3" pucks) It is the only way I could chlorinate during the day.
Here are my levels before I brought the cl up
Cl 3.5
Ph 7.4
Ta 100
CYA 60-65
CH 150
Like I said the water looks a lot better but it seems to be consuming a lot of chlorine ??
Thanks
Kevin
Ken,
Yes I do have a main Drain and My filter is DE , There was some nasty brown water coming out of mt jets so I also backwashed the filter yesterday and added new DE
Sorry forgot that part
Kevin
Bookmarks