+ Reply to Thread
Results 1 to 2 of 2

Thread: Help needed wiring 2 speed pump

  1. #1
    mjs31 is offline Registered+ Thread Analyst mjs31 0
    Join Date
    Jun 2006
    Location
    Texas
    Posts
    81

    Default Help needed wiring 2 speed pump

    As mentioned in another post, looks like my electricians did not wire the pump correctly. I need some help figuring out what I need to do in order to get high speed.

    I have the Pentair Dynamo with a built in toggle switch on back. The electricians installed a 3 foot cord for me which runs to a 3 prong twist hooked into an intermatic timer. Looks like I am getting low speed just fine, but cannot get into high speed. Any help would be greatly appreciated.

  2. #2
    Join Date
    Dec 2004
    Location
    Akron, Ohio, USA.
    Age
    52
    Posts
    14

    Default Re: Help needed wiring 2 speed pump

    Have a look at this http://poolplaza.com/discus/messages/17/907.html

    It should help you out. If not, I'll look at mine.


    Cheers!

+ Reply to Thread

Similar Threads

  1. If you run a variable-speed pump at half-speed, does the turnover rate double?
    By famousdavis in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 07-25-2012, 12:22 PM
  2. Wiring a 2 speed A.O. Smith pump motor
    By wack70 in forum Pool Equipment & Operations
    Replies: 4
    Last Post: 08-26-2011, 11:47 AM
  3. 2 speed pump. High speed puts sand in pool?
    By mjs31 in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 08-23-2007, 05:00 PM
  4. Wiring 2 speed motor - Frustrated!
    By jeffnye in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 03-04-2007, 02:34 PM
  5. Wiring of a 2-speed pump
    By mmcguire in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 01-15-2007, 12:08 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts