Quote Originally Posted by peggles0224 View Post
Thank you so much watermom. I really appreciate it.

Here's where I stand as of today. I have been partially draining and filling... partial drain and fill. I went down to local pool shop today... closed! I don't have the cya reading, but I have everything else... I think I am almost back on track. What should I do next. Here are my numbers, without the CYA, using walmart kit.

PH 7.4 - excellent I think
CL - 5 - awesome in comparison to what it was, so I did a good job drain/fill
ALK - 70 - I know this is slightly low
Hard - this is the kicker... when I put the indicator stuff in and they said it would turn a different color, well it didn't. I still put the tytrant in it and after 35 drops (which is a reading of 350) it was still the same color
CYA - As I said I don't have the reading because I ran out, but plan to go to walmart

Now what?

Thanks for all your help, you guys!!!
Your pH is fine right where it is. Your alk is slightly low, you can raise it by adding some baking soda (I'd start with about 1/2 cup in the skimmer, give it 24 hours or so to dissolve and mix thoroughly, and test again, and go from there). I'd be interested in finding out the hardness of your fill water--have you tried testing the fill water for it instead of the pool water?

What does your water look like? Is it clear yet? If so, then just raise your alk a tad (shoot for about 100), and go swimming. If it's still cloudy, then leave your filter/pump running and continue to brush daily. You also probably need to bring your water back up to shock level for just a little while longer, but without a good number for CYA I can only guess at what that shock number is. Even if it were zero, you'd be okay to take the chlorine back up to 10. Once you get a good CYA number, post it here and we can go from there.

Janet (I'm not watermom--she's out of town! )