Results 1 to 6 of 6

Thread: AutoPilot output all over the place

Threaded View

  1. #5
    cgc2 is offline ** No working email address ** cgc2 0
    Join Date
    Dec 1969
    Location
    .
    Posts
    20

    Default Re: AutoPilot output all over the place

    ...........or, as 2 technicians when I phoned in told me it could be the cord (grey).
    I gotta tell you, I am a bit miffed that the 2 screws that hold the Tri sensor in place on the manifold cracked my manifold so im out 104.00 (50% warranty).

    That on top of needing a Tri sensor and what the heck, might as well order the grey cord just in case.
    Not a pleasant summer.

    This on top of the main cpu/control panel failing in the first few months, and replaced with a "refurbished" unit.
    It should had been at least a new one, but, when it comes time to replace, I doubt seriously I would purchase a Autopilot again given MY experience. So now I watch the four units I installed for customers with crossed fingers.
    Last edited by cgc2; 08-07-2007 at 12:57 AM. Reason: update

Similar Threads

  1. Can my chlorine be high while SWCG output is low??
    By Jodester in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 10
    Last Post: 10-09-2010, 02:44 PM
  2. autopilot only going up to 50% output?
    By tenax in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 5
    Last Post: 05-27-2007, 09:46 PM
  3. Heater output is really low, burners not lit
    By mslatter in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 07-10-2006, 01:54 AM
  4. SWCG output?
    By larry2338 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 15
    Last Post: 05-23-2006, 06:46 AM
  5. AquaRite - Low Chlorine Output
    By SJohnson in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 5
    Last Post: 04-18-2006, 12:59 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts