Re: Air bubbles in return lines, found & fixed problem
Fittings from one end to another should be checked. We had a hairline crack in male end of the the solar panel diverter valve that caused all our air bubbles. It was not noticable except under close inspection. Just a little movement of the valve while inspecting caused it to almost fall apart - we caught it before that happened by itself, either by water pressure or someone bumping it, etc. What a disaster that would have been.
As soon as bubbles appear somewhere they don't belong, start checking everything before the minor crack becomes a failure, then a flood.
Beats driving to the lake!
18'x33'x52" AG oval, hard plumbed system, 22" Pentair Meteor Filter 1.5hp pump, Goldline SWCG System, 2/4x20 SolarBear Panels, Biltmore Steps - 16x14' composite deck, Pool Rover Jr
Bookmarks