Should be no problem as long as it's rated for motors and the load capacity is sufficient. That's important because the startup current for a motor will spike up beyond the capacity of a timer designed for lighting control.
Re: Timer
Should be no problem as long as it's rated for motors and the load capacity is sufficient. That's important because the startup current for a motor will spike up beyond the capacity of a timer designed for lighting control.
34 X 22/15 inground vinyl w/ Hayward equipment
Re: Timer
A 15 amp rated timer should work fine. Yes, motors do have a high starting current but so do incandescent lamps when they start cold. One would be surprised how high the inrush current is on a lamp. That's why they usually blow at turn-on.
Al
Re: Timer
I used one for a year on an old Hayward SuperPump 3/4 HP without a problem. I've since replaced my pump and when doing so, upgraded myself to an Intermatic hardwired. The wiring was pretty easy, but then again, I am not cutting off heaters, and other things, just the pump.
So, keep that in mind, if you have a heater, the plug-in one won't do it because I think you want to cut off the heater about 15-20 minutes before the pump. They make SPDT timers to control both, but they are hard-wired
Peace,
j
Posting Permissions
Reply With Quote
Bookmarks